Dealing with electrical problems in your home is crucial for safety and preventing damage.
If you notice appliances frequently breaking or lights flickering, your house might have major electrical issues. High electricity bills can also indicate a problem. In this blog, we’ll discuss common household electrical problems and how you can solve them, either on your own or with professional help.
If your circuit panel trips frequently, it could indicate a larger electrical issue. While occasional tripping is normal, frequent tripping suggests a problem with your power grid. This could be due to overloading your system with large devices. However, if overloading isn’t the cause, you should have your power grid inspected by a professional electrical services company in Dubai. A ground fault, poor wiring, or other significant faults could be the issue.
A circuit breaker is designed to hold fuses with a suitable amperage that wires can handle safely. If the amperage exceeds this limit, wires can become overheated, potentially leading to a fire. Even after replacing a damaged breaker, the previous damage to the wires remains a threat. The solution is to rewire the existing circuit.
If your house experiences power surges, it could be a sign of underlying issues. While an occasional surge may not cause harm, frequent surges can damage your home appliances and shorten their lifespan. Check for improper electrical wiring, thunderbolts, damaged power cables, or defective appliances as possible causes.
Avoid connecting low-quality appliances or switchboards to the main system. If the problem persists, consult a professional to prevent further damage.
if your house has fewer or dead electrical sockets, it can be inconvenient and dangerous. Insufficient outlets can lead to overloading, causing frequent tripping and potential damage to your devices. Using too many extension cords to compensate can also increase the risk of electrical surges.
To address this issue, use high-quality, rugged power extenders or surge protectors to safely extend the range of your outlets. However, it’s essential to have new electrical sockets installed by a professional technician to ensure safety and compliance.
For dead sockets, avoid attempting to revive them yourself, as they may be damaged or worn out. Instead, have them replaced promptly by a technician to prevent potential fire hazards. Ignoring dead sockets can lead to overuse of active sockets, creating the same overloading issues as having too few outlets.
Having more wires in a circuit board than it can handle is a common issue in homes. When a power board has too many circuits, it can become overloaded, especially if it contains tandem breakers instead of single-pole breakers. Power boards are labeled with the number of circuits they can manage.
While not highly dangerous, this issue can be problematic, especially when selling your house. To resolve this, consider adding a sub switchboard with extra sockets or investing in a larger panel.
Here are some quick tips to prevent this issue:
– Avoid daisy-chaining switchboards.
– Disconnect appliances like juicers or grinders when not in use.
– Avoid connecting too many devices to one power board or overusing a specific circuit.
– Disconnect appliances after each use, and only keep necessary devices switched on all the time.
Experiencing frequent power dips or sags in your house can be concerning. While power surges, dips, and sags are similar, they have distinct differences. A surge is an increase in current flow that can damage appliances, while dips and sags are irregular voltage fluctuations.
Dips and sags, also known as brownouts, can cause lights to flicker or dim suddenly. To prevent these issues, avoid connecting appliances to faulty sockets and ensure that devices do not draw excessive electricity from old power boards.
Mismatching wattages of sockets and bulbs can lead to dangerous outcomes. Installing a bulb with a higher voltage than the socket can handle can result in the bulb burning out, melting the fixture, and damaging the wires’ protective covering permanently. This can also lead to arcing, where electrical sparks cause wires to catch fire, potentially leading to electrical fires.
To prevent this, always use bulbs with wattages that are within the range specified for the fixture.
Thrive Services can help you with a range of electrical services, including:
- Book Hourly Services: Choose from Quick Fix (30 Minutes), Standard Service (1 Hour), In-Depth Project (1.5 Hours), Extended Support (2 Hours), and Multi-Task Support (3 Hours).
- Switch & Socket: Installation and repair services for switches and sockets.
- Wiring: Various wiring services, including wiring without casing (up to 5 meters), wiring with casing (up to 5 meters), and internal wiring (up to 5 meters).
- Switch Board Installation: Installation of switch boards with sockets, sockets only, switches only, single switch & socket, and double switch & socket.
- Washing Machine Socket Installation: Installation of washing machine sockets, with or without the product.
- Bulb & Tube Lights: Installation of warm/white bulbs, spotlights, ceiling bulbs, bulb holders, and tube lights. Options available for installing your own bulbs or including a certain number of bulbs in the service.
- Chandelier & Decorative Lights: Installation of chandeliers, fairy lights (with or without product), and home theatre systems.
- TV Installation: TV installation services for TVs up to 48 inches or above, as well as TV uninstallation services
Thrive Services offers these services to ensure your electrical needs are met efficiently and effectively, schedule your service today and enjoy peace of mind knowing your home is in good hands.
FAQ
1.What types of electrical services does Thrive Services offer?
Thrive Services offers a wide range of electrical services, including switch and socket installation, wiring, bulb and tube light installation, chandelier installation, and TV installation, among others.
2.How do I know if my electrical sockets are overloaded?
You may notice frequent tripping of circuit breakers, burning smells, or warm outlets, which are signs of an overloaded electrical socket.
3.Can I install my own electrical fixtures and appliances?
While it’s possible to install some fixtures and appliances on your own, it’s recommended to hire a professional to ensure proper installation and safety.
4.What should I do if I experience frequent power surges?
If you experience frequent power surges, it’s important to identify the cause, which could be faulty wiring, damaged power cables, or defective appliances. Consulting a professional electrician is recommended.
5.How can I prevent electrical fires in my home?
To prevent electrical fires, avoid overloading electrical sockets, use appliances with the correct voltage rating, and regularly inspect your home’s wiring for any signs of damage.